Product Categories

Contact Us

Add:Luoyang Town,Wujin District,Changzhou,Jiangsu, China

MOB:+86-15295036218

Tel:+86-519-88556132

Fax:+86-519-88557327

E-mail:Ida@js-chenyu.com

News and Knowledge

Home > News and Knowledge > Content
Solid Fuel Easy To Carry Is Popular
Oct 24, 2017

Solid fuel is a new type of fuel, it can be lit with a match, can heat food, ignite the honeycomb, easy to carry, very popular. With the increasing development of tourism, people's living standards continue to improve, solid fuel will undoubtedly have a great market.

First, raw materials and production equipment

1, raw material formula: solid fuel production of raw materials for the smoke-free charcoal powder (or anthracite), saw powder, paraffin and alcohol, the weight ratio:

Carbon powder (particle size 80 mesh, water content <10%) 60,

Saw powder (size 40 mesh) 12,

Paraffin (melting point 54-60 ° C) 20,

Alcohol (concentration 95%) 8.

2, the production equipment: the main production equipment, a sandwich pot, a grinding machine (with the old punch modified), stirring kettle two, electric furnace (or coal stove) and a sprayer. Soil production can be used research, clamp bench instead of grinding machine, punching machine.

Second, the production process

1, take paraffin 1 kg placed in the sandwich pot to dissolve, until all the melting after adding 6 kg of charcoal, 1.2 kg sawdust powder, while stirring to join, keep 60 ℃ temperature stirring 5-8 minutes, paraffin with the coal, Sawdust powder mix well and then cool the spare.

2, the above fuel cooled to 250 ℃ below, the 800 grams of alcohol poured into the sprayer, while stirring the alcohol into the raw materials, stir quickly after the mix into a small basin, so that the mixture just filled On the plastic cloth, to prevent alcohol evaporation.

3, the mixture into the mold, on the punching machine or pliers on the compression molding.

4, the sandwich pot on the fire, put 10 kg (only consumption of about 1 kg), melt, the molding of raw materials into the wax wrapped in a thin layer of wax, remove the cooling is solid fuel Finished product, can be sold after packaging.

Third, the packaging and use requirements

General 8 pieces of solid fuel for a box, each weighing 20 grams. A box is equipped with two mosquito coils, when used in solid fuel on the mosquito coils, lit with a match, you can heat the items.

Fourth, pay attention to matters

1, solid fuel molding pressure requirements of 80-100 kg / square centimeter. The pressure is too small is not easy to compaction, not burning, and alcohol is also easy to volatile.

2, pressed into a block, to quickly wrap the wax layer to prevent the evaporation of alcohol, usually a person pressure, a person wrapped.

3, 20 grams of solid fuel is half of the round, the diameter of 4-5 cm, the middle of the 6 diameter 0.5 cm holes (1 in the middle, surrounded by 5).

4, the packaging in addition to mosquitoes, the best to do a triangular bracket, supporting the heating material or honeycomb.

A large class of fuel. Can produce heat or power of solid-state combustible material. Mostly contain carbon or hydrocarbons. Natural wood, peat, lignite, bituminous coal, anthracite, oil shale and so on. After processing from charcoal, coke, coal bricks, briquettes and so on. In addition, there are some special varieties, such as solid alcohol, solid rocket fuel. Compared with liquid fuel or gaseous fuels, the general solid fuel combustion is difficult to control, the efficiency is low, the ash is more. Can be used directly as a fuel, but also for the manufacture of liquid fuels and gaseous fuels raw materials or chemical products of raw materials.