Product Categories

Contact Us

Add:Luoyang Town,Wujin District,Changzhou,Jiangsu, China

MOB:+86-15295036218

Tel:+86-519-88556132

Fax:+86-519-88557327

E-mail:Ida@js-chenyu.com

News and Knowledge

Home > News and Knowledge > Content
Solid Fuel Is A New Type Of Fuel
Jun 02, 2017

  Solid fuel is a new type of fuel, it can be lit with a match, can heat food, ignite the honeycomb, easy to carry, very popular. With the increasing development of tourism, people's living standards continue to improve, solid fuel will undoubtedly have a great market.

  First, the raw material formula and production equipment

  1, raw material formula: solid fuel production of raw materials for the smoke-free charcoal powder (or anthracite), saw powder, paraffin and alcohol, the weight ratio: carbon powder (particle size 80 head, water content <10%) 60 Sawing powder (particle size 40 mesh) 12 paraffin (melting point 54-60 ℃) 20 alcohol (concentration 95%) 8 2, production equipment: the main production equipment, a sandwich pot, a grinding machine (modified with the old punch), stirring Kettle two, electric stove (or coal stove) one and a sprayer. Soil production can be used research, clamp bench instead of grinding machine, punching machine.

  Second, the production process

  1, take paraffin 1 kg placed in the sandwich pot to dissolve, until all dissolved by adding 6 kg of charcoal, 1.2 kg sawdust powder, while stirring to join, keep 60 ℃ temperature stirring 5-8 minutes, paraffin with coal, Sawdust powder mix evenly and then cool the spare.

  2, the above fuel cooled to 250 ℃ below, the 800 grams of alcohol poured into the sprayer, while stirring the alcohol into the raw materials, stir quickly, into a small basin, so that the mixture just filled On the plastic cloth, to prevent alcohol evaporation. The following are the same as the "

  3, the mixture into the mold, on the punching machine or clamp on the compression molding.

  4, the sandwich pot on the fire, into 10 kg (only consumption of about 1 kg), melt, the molding of raw materials into the wax wrapped in a thin layer of wax, remove the cooling is solid fuel Finished, packaged after the sale.

  Third, the packaging and the use of the general requirements of 8 solid fuel for a box, each weighing 20 grams. A box is equipped with two mosquito coils, when used in solid fuel on the mosquito coils, lit with a match, you can heat the items.

  Fourth, pay attention to matters

  1, solid fuel molding pressure requirements of 80-100 kg / square centimeter. The pressure is too small is not easy to compaction, not burning, and alcohol is also easy to volatile.

  2, pressed into a block, to quickly wrap the wax layer to prevent the evaporation of alcohol, usually a person pressure, a person wrapped.

  3,20 grams of solid fuel is half of the round, the diameter of 4-5 cm, the middle of the 6 diameter 0.5 cm holes (1 in the middle, around 5).

  4, the packaging in addition to mosquitoes, the best to do a triangular bracket, supporting the heating material or honeycomb.